Asix net что это
Перейти к содержимому

Asix net что это

  • автор:

Industry news

WiFi + Ethernet модуль AXM22001-2A от ASIX Electronics

Компания ASIX ELECTRONICS предлагает беспроводные модули AXM22001-2A-C, совместимые с IEEE 802.11b/g WiFi 2.4 ГГц. Наличие блока MAC Ethernet позволяет построить WiFi—Ethernet мост и подключить беспроводное WiFi-устройство к проводной сети. Модули содержат согласованный ВЧ-тракт и интерфейсы для связи с платой пользователя. Это дает возможность применять модуль не только как самостоятельное устройство, но и в качестве сопроцессора в сложных и высокоинтегрированных устройствах, например, в системах «умный дом», охранных и мониторинговых системах.

WiFi + Ethernet модуль AXM22001-2A

На сайте ASIX доступна полная техническая документация, описывающая аппаратную часть модуля и особенности работы с ним. Разработчикам предлагаются примеры реализации беспроводных интерфейсов RS232 и SPI, а также примеры подключения камеры и микрофона к модулю AXM22001-2A-C. Для программирования модуля специалисты ASIX предоставляют среду разработки и утилиты для обновления ПО, диагностики и конфигурирования модуля.

Характеристики модулей AXM22001-2A-C:

Поддержка IEEE 802.11b/g 2,4 ГГц WiFi
Встроенная PCB-антенна
Максимальная дальность радиосигнала — 300 м при прямой видимости
Поддержка структурных управляемых сетей и сетей типа Ad-Hoc
Шифрование данных по алгоритмам WEP-64/128, TKIP (WPA-PSK), AES (WPA2-PSK)
1 Мбайт ПЗУ
Интерфейсы UART, SPI, I2C, I2S, PCM, 32 выхода GPIO
Интерфейсы MII и RMII
Программная поддержка TCP, UDP, ICMP, IGMP, IPv4, DHCP, BOOTP, ARP, DNS, SMTP, SNTP, UPnP, PPPoE и HTTP
Требуется одно питание 3,3 В
Размеры модуля 51 × 28 × 4,5 мм

В модуле AXM22001-2A-C используется микроконтроллер AX22001 с поддержкой TCP/IP и IEEE 802.11 WLAN MAC/Baseband. Он имеет 1 Мбайт рабочей флэш-памяти, ОЗУ основного процессора (MCPU) 64 Кбайт и ОЗУ «беспроводного» ЦПУ (WCPU) 32 Кбайт и выпускается в 128-выводном корпусе LQFP. Микроконтроллер программно совместим со стандартным ядром 8051/80390 и работает на частоте до 80 МГц.

Для Wi-Fi в AX22001 предназначен второй встроенный ЦПУ с блоком WLAN MAC/Baseband. Он совместим со стандартом IEEE 802.11a/b/g, что позволяет работать с пропускной способностью до 54 Мбит/с и поддерживает как управляемые сети, так и сети типа Ad-Hoc с протоколами шифрования WEP-64/128, TKIP, AES.

Микроконтроллер AX22001 оснащён различными периферийными интерфейсами с режимом DMA (UART, SPI, I2C, однопроводной интерфейс), программируемыми счётчиками, схемой подстройки частоты и внутренним резонатором 32,768 КГц, что делает Wi-Fi модуль AXM22001-2A-C универсальным и компактным продуктом.

Заказать Wi-Fi модули AXM22001-2A-C и получить более подробную техническую информацию можно, обратившись в любой из офисов нашей компании или написав нам по электронной почте info@eltech.spb.ru

Source: www.eltech.spb.ru • More info: http://www.eltech.spb.ru/news.html?nid=1217

EКОМП — торговая площадка ЭЛТЕХ

Официальный дистрибьютор: Analog Devices, Microchip Technology, Mean Well, Renesas Electronics, Exar, Toshiba Electronics, Tianma NLT Europe, AUO, Sierra Wireless, GigaDevice, Fibocom, ACKSYS , Avalue, ADL, Innodisk, SECO, Cognatec, Honeywell, Bel Power Solutions, Aimtec, АМЕТЕК Programmable Power, Fordata, NDK, Vectron, Chilisin, Ferriwo, Confly, AUK Contactors, FCI, Dinkle, Trxcom, IXYS, Crydom, Diotec, и др. EKOMП ( www. e-components.ru) — торговая площадка ЭЛТЕХ ( Интернет-магазин). Покупки и оплата on-line, покупка от 1 шт., доставка по России до 5 дней, самовывоз в Санкт-Петербурге и Москве. При самостоятельном офрмлении заказа — скидка 5%

© 2006 — 2023 ChipFind Ltd.
Contact phone, e-mail, ICQ
Register • Advertising

Asix net что это

ASIX s.r.o. — company introduction

ASIX s.r.o. is an electronic design house, established in 1991, located in Prague, the capital of the Czech Republic in Central Europe, a member state of the European Union.

We provide:
— Tools for development, production and service
— Complete turnkey electronic design followed by a product manufacturing
— Modular system for monitoring and automation in buildings and estates (soon to be released)

We entered the development tools industry in middle 1990s and since then we produced various programmers, emulators, logic analyzers, development boards and communication modules. We were one of the first companies introducing the In-System or In-Circuit Serial Programming and pioneered using the dynamic RAMs in logic analyzers in affordable price category.

Our products are designed, manufactured and supported in the Czech Republic. They conform to relevant regulations like CE, RoHS2 and REACH. All products are carefully tested before shipment to distributor or end customer to ensure best possible quality and reliability. Our products are made in good will to serve as best as possible. They are not intentionally «crippled» to offer only limited features. We try to get as much features as the construction allows. We plan our production to ensure that under normal conditions is any product available in stock for immediate shipment.

Application areas of our development tools are typically these:
— Electronic development and design
— Production (production lines, testing equipment)
— Service (programming, testing, communication)

We provide quick, communicative and effective technical support. Comprehensive documentation and up-to date software is available on our website. Our products are made by developers for developers. Our engineers use them everyday while working on custom projects, facing the same problems as our customers. Moreover, our customers provide us with valuable feedback that helps us to constantly enhance our products.

1. Programmers

PRESTO — first generation ISP programmer (2004), Full-Speed USB controlled and powered.
FORTE — advanced ISP programmer (2012), High-Speed USB controlled and powered, FPGAbased.

— Universal programming software UP for most devices — free updates, fast and intuitive environment, advanced external control for programming automation (e.g. in production lines), user-definable serializing, multiple instances can run simultaneously on a single computer, works under Windows and Linux.
JTAG SVF Player for SVF file based programming via JTAG inteface, especially dedicated for FPGAs and CPLDs.
PRESTO.DLL and FORTE.DLL libraries — for total user control over the programmers (for specialty algorithms, new device development, advanced research and development, testing, . )

Supported manufacturers:

Microchip & Atmel, Texas Instruments, STM, Renesas, Silicon Labs, NXP, Cypress & Spansion, Maxim Integrated, ON Semiconductor, Xilinx, Lattice, Microsemi/Actel, Intel/Altera, Micron, Adesto, ROHM, Everspin, ISSI, Macronix, Winbond, etc.

2. Logic analyzers

SIGMA2 — first generation logic analyzer (2007, redesigned 2011), Full-Speed USB controlled and powered, large event memory (256 megabit), real-time hardware data compression, up to 200 MHz sample speed, up to 16 inputs.
OMEGA — advanced logic analyzer (2012), High-Speed USB controlled and powered, extremely large event memory (512 megabit), sophisticated, real-time hardware data compression, up to 400 MHz sample speed, up to 16 inputs — futher expandable by linking more analyzers together using synchronization header. OMEGA offers also the advanced Real-Time mode with continuous recording where its large memory and data compression is used for buffering large amounts of fast data events.

SIGMA & OMEGA application package contains the main program — Logic Analyzer software and various utilities like, Frequency Measuring, Insider for debugging of serial streams, STFMerge, Configuration Utility, Pulse Counter and toolsuite for external control and connecting to user’s advanced analyzing software solutions (omegacli.exe, omegartmcli.exe, stf2bin.exe, bin2stf.exe, binconvert.exe).

3. Communication interfaces

UCAB232 and UCAB232i are USB to RS-232 converters with full signal support, the ‘i’ version offers galvanic isolation. Thanks to their quality, stability of the USB connection and supplied drivers and long term availability these converters are popular among users in automotive and scientific industries.

4. Automation and monitoring — to be released soon

A family of products for automation and monitoring, especially dedicated for buildings and estates — mini computers, more communication interfaces, sensors & actuators, video & audio modules, power management devices, etc.

Intel, Honeywell, Halliburton, Siemens, ABB, Schneider Electric, Hager, Flextronics, Otis, Rohde-Schwarz, Robert Bosch, Mercedes-Benz, Skoda Auto (VW Group), MAGNA, JVC Kenwood, Continental, Saab, MAN, Rockwell, Gorenje, ARISTON, Murr, Microsemi, Vitesse, Jabil, Jablotron, Fraunhofer-Institut, Technische Universität München, Charles University in Prague, Czech Technical University, Swedish Armed Forces — and many other companies, universities and organizations.

For more information do not hesitate to contact us!

© ASIX s.r.o., 1991- 2020. All rights reserved.

Перевод «asix» на русский

In case that the purchaser rejects the proposed VOP change, the seller is entitled to terminate the contract with asix-month notice period.

В случае, когда покупатель отклоняет предложение об изменениях ОУП, продавец имеет право расторгнуть договор с уведомлением об этом за шесть месяцев.

Initially, the series was to be called âCafe Insomniaâ, then it was renamed to âFriends like usâ, then to âSix as oneâ and only then came to the name under which the series came out.

Первоначально он должен был называться «Кафе Бессонница», потом его переименовали в «Друзья, как мы», «Шестеро, как один» и только в конце пришли к тому названию, под которым сериал и вышел.

Возможно неприемлемое содержание

Примеры предназначены только для помощи в переводе искомых слов и выражений в различных контекстах. Мы не выбираем и не утверждаем примеры, и они могут содержать неприемлемые слова или идеи. Пожалуйста, сообщайте нам о примерах, которые, на Ваш взгляд, необходимо исправить или удалить. Грубые или разговорные переводы обычно отмечены красным или оранжевым цветом.

Ничего не найдено для этого значения.
Больше примеров

Новое: Reverso для Windows

Переводите текст из любого приложения одним щелчком мыши .

Скачать бесплатно
Перевод голосом, функции оффлайн, синонимы, спряжение, обучающие игры

Результатов: 4 . Точных совпадений: 2 . Затраченное время: 88 мс

Помогаем миллионам людей и компаний общаться более эффективно на всех языках.

Asix net что это

ASIX. Electronic solutions for you.


www.asix.cz
: Site Map : ASIX s.r.o. — experts in electronic design and development — since 1991.

Online payments:

Information for
the European Union
customers


—>

Tools for development, production & service
Smart. Powerful. Affordable.

Welcome to the fascinating world of ASIX’ programmers,
logic analyzers and USB interfaces. We aspire to make your work
with microcontrollers, FPGAs, CPLDs and memories easy.
Our products help to save your time and money.

OMEGA
Very powerful and fast logic analyzer. Up to 16 channels, up to 400 MHz.
Price: € 298.-

FORTE
Very fast and flexible High-Speed USB In-Circuit Serial programmer.
Price: € 245.-

UCAB232i
USB to RS232 converter with unrivalled 5 kVolt galvanic isolation.
Price: € 90.-

SIGMA2
Fast and cost effective logic analyzer. Up to 16 channels, up to 200 MHz.
Price: € 198.-

PRESTO
Popular fast and cost effective USB In-Circuit Serial programmer.
Price: € 120.-

UCAB232
Reliable USB to RS232 converter.
Price: € 38.-

Founded in 1991, ASIX s.r.o. provides a complete turnkey electronic design followed by a product manufacturing in any quantity, with life-time maintenance, high quality technical support and service. You are welcomed to take a look at various project examples.

ASIX. What you need is what you get.

Designed & manufactured in Europe.


Quick links

Latest downloads


What’s New?

2023-11-06
New UP version
UP ver. 3.63 is available: New devices (MC9S08xxx, R7F102xxx, AVRxxx, STM32xxx, . ) implemented and various improvements, changes and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

2023-08-25
New UP version
UP ver. 3.62 is available: New devices (especially STM32xxx for FORTE and PIC16Fxxx) implemented and various improvements, changes and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

2023-08-02
New SIGMA-OMEGA version
SIGMA-OMEGA — ver. 2023-08-02 (3.08) is available: Improvements (especially added support of high DPI monitors) and several fixed made. Reference manuals for OMEGA and SIGMA2/SIGMA logic analyzers have been updated.

2023-07-11
ASIX celebrates 32nd birthday!
Our company has been registered on 11 July 1991, 32 years ago.
Many thanks to all our customers for all your support!

2023-05-15
New UP version
UP ver. 3.61 is available: New devices (especially STM32xxx and PIC32 for FORTE) implemented and various improvements, changes and fixes made.
Reference manual for FORTE has been updated.

2023-03-13
New UP version
UP ver. 3.60 is available: New devices (especially STM32xxx and R5Fxxx for FORTE) implemented and various improvements, changes and fixes made.
Reference manuals for PRESTO, FORTE and ISP2ZIF have been updated.

2023-01-12
New UP version
UP ver. 3.59 is available: New devices (especially R7Fxxx for FORTE and PIC16F1xx) implemented and various improvements, changes and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

2022-11-15
New UP version
UP ver. 3.58 is available: New devices (especially ATSAML10xxx, GD32E230xxx and dsPIC33CKxxx) implemented.

2022-09-15
New UP version
UP ver. 3.57 is available: New devices (especially STM32xx) implemented and various improvements and fixes made, changed ACTIVE LED operation for FORTE and PRESTO.
Reference manual for FORTE has been updated.

New FORTE.DLL library
FORTE.DLL library ver. 0.1.0.10 available. The 64-bit dll QShiftBytes and QShiftBytes_OutIn functions fixed.

2022-07-11
ASIX celebrates 31st birthday!
Our company has been registered on 11 July 1991, 31 years ago.
Many thanks to all our customers for all your support!

2022-06-29
New UP version
UP ver. 3.56 is available: New devices (especially STM32xx, LPC18xx and PICFJxx) implemented and various improvements and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

2022-04-19
New PRESTO.DLL library
Updated PRESTO.DLL library — 0.2.0.1 (added new AGetProgList function which returns list of serial numbers of available programmers) and related files — examples and documentation.

2022-04-04
New UP version
UP ver. 3.55 is available: New devices made by various vendors were implemented and various improvements and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

New JTAG SVF Player
JTAG SVF Player ver. 3.11 is available. An improvement and two fixes made.

2022-01-10
New UP version
UP ver. 3.54 is available: New devices (especially R5F10E, C8051F5, ATtiny and dsPIC33CK) implemented and various improvements and fixes made.
Reference manuals for PRESTO and FORTE have been updated.

2022-01-05
New prices
We are very sorry, but due to continued unfavourable market conditions we have been forced to increase the prices of some of our products — FORTE, PRESTO, ISP2ZIF, UCAB232i and UCAB232.

2021-10-19
New UP version
UP ver. 3.53 is available: New devices implemented (STM32, PIC32, dsPIC33, . ), some fixes made.

2021-08-24
New UP version
UP ver. 3.52 is available: New devices implemented (AVR32, AVR64, MSP430, R5F10, PIC16, PIC18, . ), few fixes made and new function UP_CleanUp added to UP_CONTROL.DLL library.
Application note and examples for UP_CONTROL.DLL library have been updated.

2021-07-11
ASIX celebrates 30th birthday!
Our company has been registered on 11 July 1991, 30 years ago.
Many thanks to all our customers for all your support!

2021-07-02
New SIGMA-OMEGA version
SIGMA-OMEGA — ver. 2021-07-02 (3.07) is available: 1-Wire protocol decoder added, several fixed made. Reference manuals for OMEGA and SIGMA2/SIGMA logic analyzers have been updated.

2021-05-21
New UP version
UP ver. 3.51 is available: New devices implemented, fixes made and UP_CONTROL.DLL library improved.

Application note for UP_CONTROL.DLL library has been updated.

New JTAG SVF Player
JTAG SVF Player ver. 3.10 is available. New command line parameter «-s -» has been implemented.

2021-03-18
New UP version
UP ver. 3.50 is available: New devices (especially STM32, PIC18, PIC24 and dsPIC33) implemented and various improvements and fixes made.

Reference manuals for PRESTO and FORTE have been updated.

2021-01-20
New UP version
UP ver. 3.49 is available: New devices (especially Microchip STM32, AVR and PIC) implemented and various improvements, changes and fixes made.

Reference manuals for PRESTO and FORTE have been updated.

2021-01-05
New User Manuals
User Manuals for UCAB232, UCAB232i and ISP2ZIF have been updated.

2020-12-28
End of CD-ROMs
During January 2021, we will stop supplying CD-ROMs to the FORTE and PRESTO programmers and to the OMEGA and SIGMA2 logic analyzers. All necessary files (documentation, software and drivers) are freely and free of charge available on the ASIX.tech website, always in the latest version.

2020-12-01
New FORTE.DLL version
FORTE.DLL — ver. 0.1.0.9 is available: New function I 2 C Bus Analyzer added, some DLL library bug fixes made, application examples updated and fixed.

2020-11-20
New UP version
UP ver. 3.48 is available: New devices implemented (especially STM32Gxxx and PIC32MKxxx for FORTE), various fixes made.

Several fixes and changes of the UP_CONTROL.DLL library made and the corresponding example updated.

2020-09-23
Shipping fee price reduction
for Austria, Germany, Hungary and Poland.

2020-08-26
New SIGMA-OMEGA version
SIGMA-OMEGA — ver. 2020-08-26 (3.06) is available: Improvements and fixes have been made. Reference manuals for OMEGA and SIGMA2/SIGMA logic analyzers have been updated.

2020-08-19
New UP version
UP ver. 3.47 is available: New devices implemented and various improvements, changes and fixes made. Reference manual for FORTE has been updated.

C language example added for the PRESTO.DLL library.

2020-07-11
ASIX celebrates 29th birthday!
Our company has been registered on 11 July 1991, 29 years ago.
Many thanks to all our customers for all your support!

2020-05-26
New UP version
UP ver. 3.46 is available: New devices (especially Microchip PIC18 and dsPIC33) implemented and various improvements and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2020-04-01
New UP version
UP ver. 3.45 is available: New devices (especially ATSAMDA1xxx for FORTE) implemented and various improvements and fixes made.

2020-02-03
New UP version
UP ver. 3.44 is available: New devices for FORTE (Renesas R5F10xxx and Microchip/Atmel ATSAML22xxx) implemented and various improvements and fixes made.

2020-01-10
New UP version
UP ver. 3.43 is available: New devices (Microchip/Atmel ATSAM, ATmega, ATtiny, PIC18 and PIC16) implemented and various improvements and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2019-11-27
New UP version
UP ver. 3.42 is available: New devices (especially MC9S08xxx and ATSAMD5xxx for FORTE) implemented and various changes and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2019-11-14
New JTAG SVF Player
JTAG SVF Player ver. 3.09 is available. Improvement of jtagplaycon.exe and bug fix in implementation of SVF file commands.

2019-09-20
New UP version
UP ver. 3.41 is available: New devices (especially NXP/Freescale MC9S08 for FORTE) implemented and various improvements, changes and fixes made. Reference manuals for PRESTO and FORTE have been updated.
Newly available is the UP_CONTROL.DLL library for UP software control.

2019-08-27
We moved to a new address
More information in Contact section.

2019-07-11
ASIX celebrates 28th birthday!
Our company has been registered on 11 July 1991, 28 years ago.
Many thanks to all our customers for all your support!

2019-06-27
New UP version
UP ver. 3.40 is available: New devices (especially EFM32xxx and STM32xxx) implemented and various improvements, changes and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2019-04-24
New UP version
UP ver. 3.39 is available: New devices (especially STMxxx and CY8C4xxx) implemented and various improvements, changes and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2019-02-27
New UP version
UP ver. 3.38 is available: New devices (especially Microchip PIC32MK) implemented and various improvements and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2019-01-25
New UP version
UP ver. 3.37 is available: New devices (especially EFM32) implemented and various improvements, changes and fixes made. Reference manuals for PRESTO and FORTE have been updated.

2018-12-06
New UP version
UP ver. 3.36 is available: New devices, especially by Microchip, implemented and various improvements, changes and fixes made. New MultiUP version 1.03.

2018-09-24
New UP version
UP ver. 3.35 is available: New devices, especially EFR32 made by Silicon Labs implemented and some improvements made.

2018-07-31
New UP version
UP ver. 3.34 is available: New devices, improvements, changes and bug fixes.

New reference manuals for programmers
Reference manuals for PRESTO and FORTE have been updated.

2018-07-26
New JTAG SVF Player
JTAG SVF Player ver. 3.08 is available. Improvement of jtagplaycon.exe.

2018-07-19
New JTAG SVF Player
JTAG SVF Player ver. 3.07 is available. Improvements (especially for the FORTE programmer) and bug fixes has been made.

2018-07-11
ASIX celebrates 27th birthday!
Our company has been registered on 11 July 1991.
Many thanks to all our customers!

2018-05-17
New UP version
UP ver. 3.33 is available: New devices added — especially Microchip PIC32 for PRESTO and FORTE and Renesas R5F564 for FORTE, several bug fixes implemented.

New reference manuals for programmers
Reference manuals for PRESTO and FORTE have been updated.

2018-03-29
New UP version
UP ver. 3.32 is available: New devices added — especially PIC32, several improvements made (e.g. «Device info» which shows how to connect the selected device to the programmer), various bug fixes implemented.

New reference manuals for programmers
Reference manuals for PRESTO and FORTE have been updated.

2018-02-20
ASIX.tech website launched
We moved all technical resource files (software, documentation, application notes, etc.) from the company main website ASIX.net here. The reason for this change is to prepare the main website for complete rebuilding according new web standards. From today, all CD-ROM disks supplied with our products contain the off-line version of the ASIX.tech website.

New UP version
UP ver. 3.31 is available: New devices made by NXP, Renesas and STM added for FORTE, some other devices (especially by Microchip) added for PRESTO and FORTE, various bug fixes implemented.

New reference manuals for programmers
Reference manuals for PRESTO and FORTE have been updated.

2017-12-13
Examples for FORTE.DLL in C++
We added C++ source code examples for the FORTE.DLL library — with graphical user interface and hexeditor.

2017-12-04
New UP version
UP ver. 3.30 is available: RENESAS — new renowned device vendor support started: For the FORTE programmer we added more than 200 new devices from these families: RL78/G12, RL78/G13 and RL78/G14. Some new devices added, various improvements and bug fixes implemented. Updated FORTE User’s Guide.

2017-10-31
New UP version
UP ver. 3.29 is available: New devices added, various improvements and bug fixes implemented. Updated PRESTO and FORTE User’s Guides.

2017-08-08
New UP version
UP ver. 3.28 is available: New devices added — especially STM32F4xx for FORTE a PIC16(L)F15xxx.

2017-07-11
ASIX celebrates 26th birthday!
Our company has been registered on 11 July 1991.
Many thanks to all our customers!

2017-06-29
New UP version
UP ver. 3.27 is available: New devices added — especially PIC32MM. Various improvements and bug fixes implemented. Updated PRESTO and FORTE User’s Guides.

New utility MultiUP
In the UP utility package, there is a new utility called MultiUP which allows programming with up to 4 programmers simultaneously . This is intended for customers using our programmers for production programming.

2017-05-09
New UP version
UP ver. 3.26 is available: Many new devices added — especially STM32 for the FORTE. Various improvements and bug fixes implemented. Updated PRESTO and FORTE User’s Guides.

New FORTE.DLL version
FORTE.DLL ver. 0.1.0.5 library for user control of the FORTE programmer.

New testing software for FORTE
New testing software for the FORTE programmer is available.

2017-04-19
New JTAG SVF Player
JTAG SVF Player ver. 3.06 is available.

2017-03-30
New software for OMEGA and SIGMA2 logic analyzers
New ver. 2017-03-29 is available.

—>


For more information do not hesitate to contact us!

© ASIX s.r.o., 1991-2023. All rights reserved.

All trademarks used on these WWW pages are properties of their respective owners. This information is provided in the hope that it will be useful, but without any warranty. We disclaim any liability for the accuracy of this information. We are not responsible for the contents of web pages referenced by this site. We did not advise Microsoft on how to write operating systems. We are not responsible for your local weather, no matter if fair or rainy.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *