«Display driver stopped responding and has recovered» error in Windows 7 or Windows Vista
This article introduces three methods that you can use to troubleshoot the «display driver stopped responding» issue. For more information about the cause of the issue, move to the More Information section.
Resolution
To resolve this issue, follow the steps in the methods starting with method 1 and then proceeding with method 2 and method 3 if the solutions do not resolve the issue.
Method 1: Update to the latest display driver for your graphics hardware
To update to the latest display driver for your graphics hardware by using Windows Update, click the link specific to your version of Windows and follow the steps in that article:
If installing the latest updates does not resolve the issue, continue to method 2.
Method 2: Adjust visual effects for better performance
Having multiple programs, browser windows, or email messages open at the same time can use up memory, and cause performance issues. Try to close any programs and windows that you are not using.
You can also adjust your computer for better performance by disabling some of the visual effects. Here’s how to adjust all visual effects for best performance:
- Open Performance Information and Tools by selecting Start > Control Panel. In the search box, type Performance Information and Tools, and then, in the list of results, click Performance Information and Tools.
- Select Adjust visual effects, if you are prompted for an administrator password or confirmation, type the password or provide confirmation.
- Select Visual Effects > Adjust for best performance > OK.
Note For a less drastic option, select Let Windows choose what’s best for my computer.
If this method did not resolve the issue, continue to method 3.
Method 3: Modify registry entry to increase GPU processing time
Timeout Detection and Recovery is a Windows feature that can detect when the video adapter hardware or a driver on your computer has taken longer than expected to complete an operation. When this occurs, Windows attempts to recover and reset the graphics hardware. If the GPU is unable to recover and reset the graphics hardware in the time permitted (two seconds), your system may become unresponsive, and display the error message “Display driver stopped responding and has recovered.”
Giving the Timeout Detection and Recovery feature more time to complete this operation by adjusting the registry value, may resolve this issue.
To do this, follow these steps:
- Exit all Windows based programs.
- Select Start, type regedit in the Search box, and then double-click regedit.exe from the results above. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
- Locate to the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers - On the Edit menu, select New, and then select the following registry value from the drop-down menu specific to your version of Windows (32 bit, or 64 bit):
- Close Registry Editor and then restart your computer for the changes to take effect.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up the registry in Windows 7, see Back up the registry.
For 32 bit Windows
- Select DWORD (32-bit) value.
- Type TdrDelay as the Name and then select Enter.
- Double-click TdrDelay and add 8 for the Value data and then select OK.
Display driver has stopped responding. What should I do?
This is a common error message that occurs with any NVIDIA card on any Windows operating system. When the computer detects that your graphics card is not responding, the screen goes black for a few seconds followed by the pop-up box below, and the software utilising the graphics card would stopped working.
The cause of this error is not an obvious one. It could be a corrupted or outdated graphics card, power supply, ram or overheating. If this error persists, follow the steps below to troubleshoot.
Note: If, at any time, you are not familiar or are uncomfortable performing any of the solutions below, please consult your IT department.
Turning off power management
- Open your Control Panel from the Start menu and click on Hardware and Sound.
- Click on Power Options.
- At Preferred plans, click on High performance to choose it as your preferred plan.
- Click on Change plan settings for High performance and select Change advanced power settings to display the advanced settings.
- Scroll down and expand PCI Express. Turn off the Link State Power Management setting.
- Click Apply to save the settings and click Ok to close the window.
If you are still experiencing this error, there are several other ways that might fix the problem.
Update display driver
- Open your Control Panel from the Start menu and click on Hardware and Sound.
- Under Devices and Printers, click on Device Manager.
- Expand the Display adapters. Right-click on the graphics card and select Update Driver Software.
- Select Search automatically for updated driver software.
- Update to the latest driver software.
- Open your Control Panel from the Start menu and click on System and Security.
- At Windows Update, click Check for updates.
- If there are updates to be installed, click Install updates to begin installing.
RAM and overheating
If the error does not go away, it could be a faulty RAM or your display drivers are overheating.
- To check your RAM, simply remove all the RAM sticks except one and see if it fixes the problem. Repeat this until you have found the faulty RAM stick. If the error happens no matter which RAM stick you put in, that means the RAM is not the problem here.
- To check the temperature of your display driver, you can download any PC hardware monitoring program. If you find that the temperature increases rapidly when using a graphic intensive software, you can either try cleaning the driver’s cooling fan or installing new fans.
Note: If you are not familiar or are uncomfortable performing any of the solutions above, please consult your IT department.
Genuine offer of assistance
If the problem persists, or if you have any questions, feel free to contact our support team at [email protected] .
- Prev:How to export Insight data for TNavigator
- Next:Installation of Insight failed! What should I do?
Topics
- Installation and Settings 6
- Which Java version does Insight use?
- How does Oracle’s Java licensing apply to Insight?
- How do I edit the Java’s overriding Environment Variable?
- How do I install Insight silently or via SCCM?
- How do I change Insight’s default directory?
- Why is exporting data from Insight light on CPU but heavy on RAM?
- Why is Insight running unusually slow?
- Why is my session taking so long to save?
- In Linux, why does Insight run out of memory for no good reason?
- How do I activate floating licence for multiple users?
- Why did my online activation fail?
- How can I see who is using the floating licences?
- Why doesn’t my floating licence work, even after a successful activation?
- What is the best way to copy and send DUG my project database?
- How do I load sample data?
- How should I backup my project?
- Where is my user home directory?
- How do I sync my session across offices?
- How do I create «fake» source and receiver headers from offset values?
- Calculate a Pseudo-Relief Attribute (TECVA)
- How do I create a «chair» display in the 3D view using two different volumes?
- How to calibrate interface PDFs to seismic amplitudes using crossplots
- How can I created a layered result from many different input volumes merged at horizons?
- How to interpolate RMS values on a 2D horizon?
- How do I make an isochore or isochron map in Insight?
- How can I update a horizon to tie markers at wells?
- Transforming images into 3D horizons in Insight
- Calculating Angle of Incidence
- How can I calculate pseudo-impedance from seismic data?
- Generating synthetic stacks from Intercept and Gradient volumes
- How to apply complex hand-drawn mutes to gathers and combine 2D results?
- How do I create a 3D Chair?
- How to estimate seismic bandwidth using spectral decomposition?
- How do I reverse the CDP to X/Y relationship for a seismic line?
- Why am I having issues loading SEG-Y?
- Which SEG-Y formats are supported by the SEG-Y Loader?
- Renaming lines in SEG-Y Loader
- How do I load multiple stacks or volumes from SEG-Y at the same time?
- How do I update restricted, locked, protected trace headers like offset, inline and cmp?
- SEG-Y Loading Gathers with Offsets in Centimetres
- Load SEG-Y containing traces with varying start times (DELRT)
- My data loaded successfully. Why can’t I see anything?
- Why is the 3D view not opening / giving errors / crashing?
- Why are there extra sections/lines showing up in 3D View, and how do I remove them?
- «Zoom to fit» makes everything tiny and the zoom detail and scaling level is limited
- Contours Based on Amplitude Extraction
- How do I pick contours in Insight?
- Dashed Line Selection Outlines in 2D Views
- Why does SEG-Y Loader tell me I have a duplicate survey even though the coordinates are not the same?
- How do I change survey CRS to project CRS?
- Export 2D survey as simple XY TWT file
- How do I set boundaries for my 3D survey?
- How do I create a survey without loading SEG-Y files
- Can I store a volume outside the project directory?
- Gather Types
- Insight’s Automatic Volume Class Assignment
- How do I crop a seismic volume using a polygon?
- How do I colour a volume differently between horizons?
- Why does the result of my Volume Combine process look different to my group of the same volumes?
- What should I know about Insight’s 16-bit data compression?
- How to add/replace 2D lines to an existing dugio
- How do I merge lines from multiple 2D volumes and surveys into a single volume and survey?
- How do I gain a volume between two horizons, using a spatially varying multiplier?
- Seismic Reference Datums
- A quick way to determine the angle to stack your gather data
- What are some good ways to create synthetic velocity models?
- How do I create a velocity model from time-depth (T-Z) pairs?
- How can I create a simple velocity model for 2D data?
- How do I create a velocity gradient volume?
- Simple velocity tie (to wells)
- How do I create a contact horizon for use in layered models?
- How do I perform an amplitude extraction at different angles through the volumes?
- Why is the amplitude value as shown by the cursor different than the horizon extracted value?
- How do I decimate an interpolated surface back to its original picked lines?
- How to display data from two or more horizons simultaneously
- How do I extract the number of events between 2 time horizons?
- How do I perform an amplitude extraction between two horizons?
- How do I dynamically update an Isochron Map?
- How do I pick events on absolute impedance and other non-zero mean data?
- How do I export a time-slice as an X, Y, Amplitude map?
- How to create a horizon from trace headers
- How to mark a pinchout/intersection of two surfaces using a polygon?
- Converting Horizons to a Different Vertical Domain
- How do I import or export faults?
- How do I load well data?
- Creating checkshots from a velocity model
- Height datums and abbreviations
- Why can’t I see my well in section views?
- Insight’s Automatic Well Curve Class Assignment
- Where does Single Well View extract 2D value from?
- How to export map values at specific IL/CL locations?
- Calculating Well Marker-Horizon Mistie
- Limiting correction to a radius around the well data
- How do I find out the area and volume of a polygon?
- How do I convert a .duculture file containing many shapes to a .dupoly file?
- What is the best way to crossplot the points in a series of channel structures?
- Stacking process across NaNs
- How do I filter large amplitudes, extreme values and spikes from my data?
- When should I choose a Dip filter over an F-K filter?
- How to create an octave panel using the Composite QC process
- How do I scale synthetic trace relative to seismic?
- How do I find the RMS amplitude for a single trace over a given time window? How do I do this with a synthetic?
- Why does the amplitude spectrum not show deeper peaks and troughs as expected?
- Why does my Kingdom survey appear with a different spacing in Insight?
- How do I import a Kingdom polygon to use in Insight?
- Exporting a Kingdom SQL Database to Access
- How to get interpretation into Kingdom
- SQL Server versions and backwards compatibility
- Installing MS SQL Management Studio
- How Insight detects the Petrel installation
- How do I send the Petrel message log?
- How do I export polygons from Petrel to import into Insight?
- How do I manually remove the Petrel Link?
- «Error opening file for writing» when installing Petrel Link
- How do I send horizon attributes / amplitude extractions to Petrel?
- Why is the Petrel Link showing me a different project after connecting?
- How to get interpretation into Petrel
- How do I transfer an on-the-fly horizon to Petrel?
- How do I transfer depth-converted faults to Petrel?
- How to upload to our FTP server?
- How to download, unzip and load volumes and surveys into Insight?
- Exporting GeoTiff files from Petrosys into Insight
- How do I get my data stored in a third-party database into DUG Insight?
- Where are the old Insight user manuals?
- Where can I find the manual for older versions of the software (e.g. Insight 3.1)?
- I have a great idea for Insight! How do I send DUG my suggestions?
- How to export Insight data for TNavigator
- Display driver has stopped responding. What should I do?
- Installation of Insight failed! What should I do?
- Out of memory error
- Error launching Insight on 32-bit Windows machine
- SQL database does not exist error
- There is a problem. How do I provide information on my issue?
- Help, Insight just crashed! What should I do now?
Gpu is not responding как исправить
8 апр. 2017 в 9:15
Fatal Error GPU not responding
Has anyone else experienced the above pop-up recently? I updated my NvidiaGTX 1070 drivers to the very latest version (381.65) and got this error for the very first time. Don’t think it’s a driver problem, all other games played since updating appear to run fine.
Any help would be greatly appreciated.
Сообщения 1 – 13 из 13
8 апр. 2017 в 9:42
Press the ‘Clear Cache’ button in the launcher.
If the problem persists, try reinstalling your GPU drivers.8 апр. 2017 в 9:56
Gpu is not responding как исправить
Автосимулятор с реалистичной физикой разрушений, позволяющей в точности спроектировать последствия аварии. В BeamNG.drive мы можете делать, что угодно с машиной или грузовиком — вещи, которые другие игры не позволяют.
Вы можете ехать по бездорожью в семейном седане или швырять грузовик по гоночной трассе, и всё это с красивой физикой мягких тел. Вы можете модифицировать эти же автомобили, чтобы они были гоночными зверями, монстрами-дерби или внедорожниками — или просто разнести их на куски.
Минимальные требования
Операционная система: 64-разрядная Windows 7 Service Pack 1
Процессор: Intel Core i3-6300 или AMD FX-6300
Видеокарта: NVIDIA GeForce GTX 550 Ti или Radeon HD 7750
Оперативная память: 16 ГБ
Место на диске: 45 ГБ
DirectX: 11.0Рекомендуемые требования
Операционная система: 64-разрядная Windows 10
Процессор: Intel Core i7-6700 или AMD Ryzen 7 1700
Видеокарта: NVIDIA GeForce GTX 970 или AMD R9 290
Оперативная память: 32 ГБ
Место на диске: 50 ГБ
DirectX: 11.0
Другое: Рекомендуется геймпад